makermade_300_3d_printer
MakerMade 300 3D printer
| Name | MakerMade 300 3D printer |
|---|---|
| Owner | Makers' Alliance |
| Location | 3D printing |
| Training needed | Yes |
| Hackable | Yes |
| Model | 300 |
| Serial | UNKNOWN |
| Arrival Date | 4/25/2026 |
| Working | Yes |
| Contact | Sam Harmon |
Current Status: Mostly Functional
Specifications:
- Build Area: 300x300x400mm
- Material Used: 1.75 mm filament, PLA tested so far. PETG will likely work.
This was recently donated to us by Soulcraft.
It's very similar to a Creality CR-10S.
Has a color touch display.
So far we've just cleaned it up a bit, and had to tighten the toolhead carriage on the X-axis. It's printed the gcode files we found on the SD card.
makermade_300_3d_printer.txt · Last modified: by sdh7