davinci_xyz_1.0
DaVinci XYZ 1.0
| Name | DaVinci XYZ 1.0 |
|---|---|
| Owner | Makers' Alliance |
| Location | 3D printing |
| Training needed | No |
| Hackable | No |
| Model | XYZ 1.0 |
| Serial | - |
| Arrival Date | 6/1/2021 |
| Working | Yes |
| Contact | Makers' Alliance |
Current Status: Needs Calibration
Updated the stock firmware to Repetier 0.92, so it no longer needs chipped filament (Yay!).
Now part of the Octoprint farm - http://octoprint.local:8084
For your Cura Profiles: Start Gcode:
G28
End Gcode:
M104 S0 M140 S0 G91 G1 F150 G1 Z10 G90 G28 X0 G28 Y0 M8
Build Envelope is 200x200x200. Gcode Flavor is Repetier.
Also note that the build platform is a little backwards compared to the other printers- the origin is the back left of the print bed, so prints will be “mirrored” relative to where you put them in Cura.
davinci_xyz_1.0.txt · Last modified: 2022/04/13 03:10 by sdh7