Differences

This shows you the differences between two versions of the page.

--- enco_drill_press [2017/01/10 04:01] – sdh7
+++ enco_drill_press [2018/01/15 03:18] (current) – sdh7
@@ Line 31: / Line 31: @@
 Future work that could be done:
   *Set up depth stop/gauge mechanism?
+    * See the second half of [[https://www.youtube.com/watch?v=K8s-ufGi_P0|this video]] for an example of what I'm thinking of
+    * Find the measurements of the spindle where it would attach, approximate distance to where the depth stop would go, and diameter of the depth stop hole.
+    * Start with a wooden "proof of concept before making it in aluminum?
+    * Cut out hole with hole saw/CNC/whatever
+    * drill holes to 1/4-20 tap diameter (#7, IIRC) or smaller if necessary, cut in half, tap one half and bore the other?
+    * use transfer punch to mark where to drill for threaded rod
+    * Grizzly sell a variety of threaded "stop collars" that would be a massive improvement over nuts on threaded rod, but only available in a handful of sizes (one kind in 3/8" (called a Quill Stop), and the other in 3/8", 1/2", 8mm, and 10mm (Threaded Stop Collars))
 {{tag>[needs_minor_repair needs_details]}}