User Tools

Site Tools


todo

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
todo [2019/10/19 19:16]
sdh7
todo [2019/10/22 19:09] (current)
sdh7
Line 9: Line 9:
   * <​del>​Improved shelving around the back of the space? - we have some pieces of 2x10 that might be useful for this...</​del>​   * <​del>​Improved shelving around the back of the space? - we have some pieces of 2x10 that might be useful for this...</​del>​
     *<​del>​ Re-work back wall in general - move speakers to corners for better separation(?​) and to free up space there.</​del>​     *<​del>​ Re-work back wall in general - move speakers to corners for better separation(?​) and to free up space there.</​del>​
-  * Build a little stand for the [[Monoprice SLA Printer]], such that the [[UV Curing Lamp]] sits under it (with a little extra space for curing taller parts. 
-    * Bonus - add a translucent acrylic window on hinges to cover the lamp area - the laser cutter should be able to handle that size... 
-    * <​del>​Double bonus - fix the SLA printer vat...</​del>​ 
   * <​del>​the i3 needs its BuildTak replaced. We have it, just need to do it...</​del>​   * <​del>​the i3 needs its BuildTak replaced. We have it, just need to do it...</​del>​
   * <​del>​Deep cleaning & organizing at the Electronics Station</​del>​   * <​del>​Deep cleaning & organizing at the Electronics Station</​del>​
-  * Take apart the Hot air station and see if the pump can be repaired or replaced. 
   * <​del>​Paint Marker an "​MA"​ on tools that don't have it, so that they'​re easier to identify</​del>​   * <​del>​Paint Marker an "​MA"​ on tools that don't have it, so that they'​re easier to identify</​del>​
-  * Reorganize green tool shelf - re-optimize cubbies to make more sense+  * <del>Reorganize green tool shelf - re-optimize cubbies to make more sense</​del>​
     * <​del>​Set aside two cubbies for measuring tools</​del>​     * <​del>​Set aside two cubbies for measuring tools</​del>​
     * <​del>​Re-label new cubbies by use</​del>​     * <​del>​Re-label new cubbies by use</​del>​
-  * Finding things: ​+  * <del>Finding things:</​del> ​
     * <​del>​The bin of USB Micro/​C/​Lightning cables</​del>​     * <​del>​The bin of USB Micro/​C/​Lightning cables</​del>​
     * <​del>​The Ryobi Multitool body - we have a head for it now, but the body is AWOL</​del>​     * <​del>​The Ryobi Multitool body - we have a head for it now, but the body is AWOL</​del>​
 +    * <​del>​Pen turning stock</​del>​
 +    * <​del>​Chain & combination lock</​del>​
   * <​del>​Go through the Pallet Racks a little bit - clean up/​consolidate where possible</​del>​   * <​del>​Go through the Pallet Racks a little bit - clean up/​consolidate where possible</​del>​
     * <​del>​Assuming some space is freed up here, move some extraneous things into it as "deep storage"​ (i.e. all but one of the totes of "wire bundles",​ etc.)</​del>​     * <​del>​Assuming some space is freed up here, move some extraneous things into it as "deep storage"​ (i.e. all but one of the totes of "wire bundles",​ etc.)</​del>​
-  * A general going-through of the shelves: +  * <del>A general going-through of the shelves:</​del>​ 
-    * Consolidate things that need to be consolidated +    * <del>Consolidate things that need to be consolidated</​del>​ 
-    * Purge things that need to be purged  +    * <del>Purge things that need to be purged</​del> ​ 
-    * label things that need to be labeled+    * <del>label things that need to be labeled</​del>​
   * Label cabinets in the Shop Zone based on what's inside each door   * Label cabinets in the Shop Zone based on what's inside each door
   * disc/strip sander needs a new sanding belt (1x30?) - belts purchased, just need to install...   * disc/strip sander needs a new sanding belt (1x30?) - belts purchased, just need to install...
 +    * Turns out it's 1x42". Ross may have some, or we can order more.
 +  * Build a little stand for the [[Monoprice SLA Printer]], such that the [[UV Curing Lamp]] sits under it (with a little extra space for curing taller parts.
 +    * Bonus - add a translucent acrylic window on hinges to cover the lamp area - the laser cutter should be able to handle that size...
 +    * <​del>​Double bonus - fix the SLA printer vat...</​del>​
 +  * <​del>​Take apart the Hot air station and see if the pump can be repaired or replaced.</​del>​
 +    * <​del>​Good news - pump does work if "​AIR"​ pot is turned all the way up. Errant pot looks like a 500k...</​del>​
 +
   ​   ​
 ====General Space Infrastructure==== ====General Space Infrastructure====
Line 50: Line 55:
   * Electrical wiring for the "​new"​ 220V stick welder (convert its plug to something better? L6-30? - check with John K.?)   * Electrical wiring for the "​new"​ 220V stick welder (convert its plug to something better? L6-30? - check with John K.?)
   * Build a nice table add-on/​fence for the [[Enco Drill Press]]?   * Build a nice table add-on/​fence for the [[Enco Drill Press]]?
-  * Measure T-slot nuts for the [[Enco Drill Press]]. See of additional ones are available, or maybe make some.+  * <del>Measure T-slot nuts for the [[Enco Drill Press]]. See of additional ones are available, or maybe make some.</​del>​
   * Implement Dust Collection Station? ​   * Implement Dust Collection Station? ​
  
todo.1571526980.txt.gz · Last modified: 2019/10/19 19:16 by sdh7