User Tools

Site Tools


todo

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
todo [2019/07/20 22:07] sdh7todo [2019/10/22 19:09] (current) sdh7
Line 2: Line 2:
 ====THINGS YOU CAN BRING THAT WOULD HELP==== ====THINGS YOU CAN BRING THAT WOULD HELP====
   * <del>"Shoe Box"-style plastic boxes. Nicer ones from Home Depot or even dollar store ones. We're not picky. If we had 20 of these show up, I'm sure we'd find a use for at least 20 more.</del> We have plenty of these at the moment.    * <del>"Shoe Box"-style plastic boxes. Nicer ones from Home Depot or even dollar store ones. We're not picky. If we had 20 of these show up, I'm sure we'd find a use for at least 20 more.</del> We have plenty of these at the moment. 
-  * <del>Pie-in-the-sky request: Another nice rolling tool chest like our Craftsman one? If somebody craigslists/HGRs one for $50 or less, I'll reimburse you (only applicable one time. Include screenshot/printout of ad for proof of price)</del> 
   * IEC power cables? Our stash is getting a little low...   * IEC power cables? Our stash is getting a little low...
  
-====7/20 Punch List==== +====Next Makerspace Maintenance Punch List **(10/19)**==== 
-  * <del>Mount Big Displays to the back wall (VESA Mounting hardware is on hand)</del>+  * <del>Clear off main two tables, and refresh the paper tops (DO FIRST)</del> 
 +  * <del>Take garbage to dumpster (DO SECOND)</del> 
 +  * <del>Improved shelving around the back of the space? - we have some pieces of 2x10 that might be useful for this...</del> 
 +    *<del> Re-work back wall in general - move speakers to corners for better separation(?) and to free up space there.</del> 
 +  * <del>the i3 needs its BuildTak replaced. We have it, just need to do it...</del> 
 +  * <del>Deep cleaning & organizing at the Electronics Station</del> 
 +  * <del>Paint Marker an "MA" on tools that don't have it, so that they're easier to identify</del> 
 +  * <del>Reorganize green tool shelf - re-optimize cubbies to make more sense</del> 
 +    * <del>Set aside two cubbies for measuring tools</del> 
 +    * <del>Re-label new cubbies by use</del> 
 +  * <del>Finding things:</del>  
 +    * <del>The bin of USB Micro/C/Lightning cables</del> 
 +    * <del>The Ryobi Multitool body - we have a head for it now, but the body is AWOL</del> 
 +    * <del>Pen turning stock</del> 
 +    * <del>Chain & combination lock</del> 
 +  * <del>Go through the Pallet Racks a little bit - clean up/consolidate where possible</del> 
 +    * <del>Assuming some space is freed up here, move some extraneous things into it as "deep storage" (i.e. all but one of the totes of "wire bundles", etc.)</del> 
 +  * <del>A general going-through of the shelves:</del> 
 +    * <del>Consolidate things that need to be consolidated</del> 
 +    * <del>Purge things that need to be purged</del>  
 +    * <del>label things that need to be labeled</del> 
 +  * Label cabinets in the Shop Zone based on what's inside each door 
 +  * disc/strip sander needs a new sanding belt (1x30?) - belts purchased, just need to install... 
 +    * Turns out it's 1x42". Ross may have some, or we can order more.
   * Build a little stand for the [[Monoprice SLA Printer]], such that the [[UV Curing Lamp]] sits under it (with a little extra space for curing taller parts.   * Build a little stand for the [[Monoprice SLA Printer]], such that the [[UV Curing Lamp]] sits under it (with a little extra space for curing taller parts.
     * Bonus - add a translucent acrylic window on hinges to cover the lamp area - the laser cutter should be able to handle that size...     * Bonus - add a translucent acrylic window on hinges to cover the lamp area - the laser cutter should be able to handle that size...
-  * Improved shelving around the back of the space - we have some pieces of 2x10 that might be useful for this... +    * <del>Double bonus fix the SLA printer vat...</del> 
-  * improved under-bench storage? +  * <del>Take apart the Hot air station and see if the pump can be repaired or replaced.</del> 
-    * <del>Move the two Radio Shack drawers on the right-hand wall under the 3D printing bench</del> +    * <del>Good news - pump does work if "AIR" pot is turned all the way up. Errant pot looks like 500k...</del> 
-  * Go through the Pallet Racks a little bit - clean up/consolidate where possible +
-  * <del>Remove the farthest down shelving along the left wall, and turn that into a dedicated area for the laser cutter/vinyl cutter</del> +
-    * <del>Put up a bit of pegboard behind laser cutter?</del> +
-    * <del>Put a shelf above the pegboard, for storing vinyl cutter tools/laser stock, and a light underneath?</del> +
-  * A general going-through of the shelves: +
-    * Consolidate things that need to be consolidated +
-    * Purge things that need to be purged +
-    * <del>Rearrange things such that electronic components are closer to test equipment/electronics bench?</del> +
-      * This has been started already +
-  * Laser cutter air assist - a nozzle attachment has been printed, should just be plumbing some tubing to the pump +
-    * Add light switch to activate air assist if we wanna get fancy. +
-    * This has been started+
      
 ====General Space Infrastructure==== ====General Space Infrastructure====
Line 40: Line 51:
  
 ====Shop Zone==== ====Shop Zone====
-  * Drill bit sorting(ok, probably not, but it does drive me crazy) + 
-    * Priority: really low, unless it's driving you crazier than me. +
   * Tool organization - any improvements are welcome!   * Tool organization - any improvements are welcome!
-  * Better stand/mount for the [[Disc Sander]]? If not, see about improving stiffness of the existing stand... 
   * Electrical wiring for the "new" 220V stick welder (convert its plug to something better? L6-30? - check with John K.?)   * Electrical wiring for the "new" 220V stick welder (convert its plug to something better? L6-30? - check with John K.?)
   * Build a nice table add-on/fence for the [[Enco Drill Press]]?   * Build a nice table add-on/fence for the [[Enco Drill Press]]?
-  * Measure T-slot nuts for the [[Enco Drill Press]]. See of additional ones are available, or maybe make some.+  * <del>Measure T-slot nuts for the [[Enco Drill Press]]. See of additional ones are available, or maybe make some.</del>
   * Implement Dust Collection Station?    * Implement Dust Collection Station? 
  
Line 71: Line 80:
   * Make some kind of filament storage solution? (clear plastic tote w/holes & gaskets, and a bunch of color-changing silica gel??)   * Make some kind of filament storage solution? (clear plastic tote w/holes & gaskets, and a bunch of color-changing silica gel??)
   * Figure out steps needed to make the [[K40 Laser Engraver]] chooch safely & reasonably   * Figure out steps needed to make the [[K40 Laser Engraver]] chooch safely & reasonably
 +    * Move the surge strip powering that stuff to the front of the cart.
     * Add an Emergency stop?     * Add an Emergency stop?
     * Figure out water pump/alarm stuff (short version: water pump is running, but flow alarm is triggering? need better pump? replace alarm? right now alarm is shorted out in order to test functionality...)     * Figure out water pump/alarm stuff (short version: water pump is running, but flow alarm is triggering? need better pump? replace alarm? right now alarm is shorted out in order to test functionality...)
-    * Add air assist+    * <del>Add air assist</del> air assist was kind of a bust - it's loud, the hose got in the way, didn't help all that much, and then the air nozzle got burned up...
    
 ====Electronics==== ====Electronics====
   * Organize components better?   * Organize components better?
-  * <del>figure out a way to keep all the Radio Shack bins together??</del> they're mostly under the benches now 
   * Organize electronics tools better - electronics bench is a good start at this...   * Organize electronics tools better - electronics bench is a good start at this...
   * <del>Figure out power supply pinout for prototyping station</del>. - We have a picture of the pinout. Fabricobble a replacement or otherwise find one.   * <del>Figure out power supply pinout for prototyping station</del>. - We have a picture of the pinout. Fabricobble a replacement or otherwise find one.
Line 96: Line 105:
 ====Miscellaneous==== ====Miscellaneous====
   * Inventory First Aid supplies. Make list of recommended additions and/or replacements for anything missing.   * Inventory First Aid supplies. Make list of recommended additions and/or replacements for anything missing.
 +    * There are OSHA guidelines for what should be in one for various group sizes. 
   * Repair the rolling cart - I kind of tried epoxy but it didn't seem to work. Weld? Bolt?   * Repair the rolling cart - I kind of tried epoxy but it didn't seem to work. Weld? Bolt?
  
todo.1563674820.txt.gz · Last modified: 2019/07/20 22:07 by sdh7

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki