shopsmith_mark_v
This is an old revision of the document!
Shopsmith Mark V
| Name | Shopsmith Mark V |
|---|---|
| Owner | Makers' Alliance |
| Location | Shop Zone |
| Training needed | yes |
| Hackable | no |
| Model | Mark V |
| Serial | UNKNOWN |
| Arrival Date | 2014 |
| Working | yes |
| Contact | Sam Harmon |
Current Status: Reasonably Functional, not all functions tested.
An original Shopsmith Mark V (1955ish Vintage), with Bandsaw and Beltsander, Table saw, Scroll saw, and other tooling.
Current Status: Decently functional, though not all functions have been tested.
Functions tested and working:
- Belt sander
- Bandsaw
Functions of unknown usability:
- Wood Lathe
- Would need a faceplate and MT2 tailstock center
- Table saw
- Disc Sander
- Drill Press
- Scroll saw
- This has leaked an enormous amount of oil. ???
Notes:
- Beltsander belts are 6“x 48” - have a couple from Harbor Freight.
- Bandsaw blades are 72“. We have one spare in the packaging currently.
- Disc sander is 12”
shopsmith_mark_v.1484187372.txt.gz · Last modified: 2017/01/12 02:16 by sdh7