Differences

This shows you the differences between two versions of the page.

--- ryobi_bench_grinder [2017/02/10 22:08] – sdh7
+++ ryobi_bench_grinder [2017/12/01 21:58] – sdh7
@@ Line 16: / Line 16: @@
 A Ryobi 6" Bench Grinder
-Currently has the two grinding stones (one sort of coarse, one finer) it came with installed. We should get a wire wheel for aluminum finishing as well.
+Currently has the fine wheel on the left, and a wire wheel on the right.
 Works well, but motor is a little slow to start up. Give it a good 15-30 seconds before grinding.
 Notes:
-  *DO NOT USE THE GRINDING STONES ON ALUMINUM. IRON/STEEL ONLY. USE THE WIRE WHEEL ON ALUMINUM. DON'T BE THAT PERSON.
+  *DO NOT USE THE GRINDING STONES ON ALUMINUM. IRON/STEEL ONLY. USE THE WIRE WHEEL ON ALUMINUM. DON'T BE THAT PERSON. ALUMINUM GUMS UP GRINDING STONES AND THEY HAVE TO BE RE-DRESSED.
+  *Don't use the thicker Harbor Freight wire wheel. It doesn't spin very well in the grinder. Use the Avanti wire wheel (currently installed)
 To-Do List
-  * Mount it to a bench.
+  * Mount it to a bench or moveable stand
 {{tag>[needs_details]}}