ryobi_bench_grinder
This is an old revision of the document!
Bench Grinder
| Name | Ryobi 6“ Bench Grinder |
|---|---|
| Owner | Sam Harmon |
| Location | Shop Zone |
| Training needed | yes |
| Hackable | no |
| Model | |
| Serial | |
| Arrival Date | January 7th, 2017 |
| Working | yes |
| Contact | Sam Harmon |
Current Status: Fully Functional. Should be mounted to something.
A Ryobi 6” Bench Grinder
Currently has the two grinding stones (one sort of coarse, one finer) it came with installed. We should get a wire wheel for aluminum finishing as well.
Works well, but motor is a little slow to start up. Give it a good 15-30 seconds before grinding.
Notes:
- DO NOT USE THE GRINDING STONES ON ALUMINUM. IRON/STEEL ONLY. USE THE WIRE WHEEL ON ALUMINUM. DON'T BE THAT PERSON.
To-Do List
- Mount it to a bench.
ryobi_bench_grinder.1486782532.txt.gz · Last modified: 2017/02/11 03:08 by sdh7