monoprice_sla_printer
This is an old revision of the document!
Monoprice SLA Printer
| Name | Monoprice SLA Printer |
|---|---|
| Owner | Makers' Alliance |
| Location | Digital/Electronics |
| Training needed | Yes |
| Hackable | No |
| Model | MP Mini SLA |
| Serial | UNKNOWN |
| Arrival Date | UNKNOWN |
| Working | Yes |
| Contact | Sam Harmon |
Current Status: Fully Functional
Caveats:
- DO NOT SCRAPE THE FEP SHEET AT THE BOTTOM OF THE TANK. Otherwise we'll have to order a new one and carefully replace it.
- Just use clear resin. Our one experiment with opaque resin ended poorly.
monoprice_sla_printer.1579208504.txt.gz · Last modified: 2020/01/16 21:01 by sdh7