Differences

This shows you the differences between two versions of the page.

--- jet_band_saw [2016/10/30 17:11] – external edit 127.0.0.1
+++ jet_band_saw [2017/01/10 05:07] – sdh7
@@ Line 1: / Line 1: @@
 =====JET Band Saw=====
+^Name| JET Band Saw|
+^Owner | Makers' Alliance |
+^Location | Shop Zone |
+^Training needed| yes|
+^Hackable| no |
+^Model| HVBS-56M|
+^Serial| |
+^Arrival Date| December 2015|
+^Working| yes|
+^Contact| Sam Harmon|
+Current Status: Functional, but could use work
 In December 2015, we acquired a JET band saw from HGR.
@@ Line 8: / Line 22: @@
 Belt size: A22 V Belt
-Status: Mostly functional. Needs some work (see below).
+Status: Mostly functional. Needs some work (see below). Currently sitting on a rolling bench, which has been good enough for our use.
 Work needed:
-  *<del>Replace belt - **On hand**</del>
   *Replace blade - one on it is working for now
   *Construct a stand for it and/or temporarily attach to existing bench
@@ Line 21: / Line 34: @@
     *http://www.machinistblog.com/a-table-for-vertical-cutting-on-the-jet-5x6%E2%80%9D-band-saw/
   *Chip brush: http://www.machinistblog.com/a-chip-brush-for-the-jet-5x6-bandsaw/
+{{tag>[needs_minor_repair,needs_details,needs_maintenance]}}