duplicator_i3_plus_3d_printer
This is an old revision of the document!
Duplicator I3 PLUS 3D Printer
| Name | Duplicator I3 PLUS 3D Printer |
|---|---|
| Owner | Makers' Alliance |
| Location | 3D Printing |
| Training needed | Yes |
| Hackable | No |
| Model | PowerSpec WanHao Duplicator I3 PLUS |
| Serial | UNKNOWN |
| Arrival Date | UNKNOWN |
| Working | Yes |
| Contact | Sam Harmon |
Current Status: Fully Functional
Current workhorse printer at the space.
Print area: 200x200x200 mm (approx)
Could maybe use a bed leveling.
The easiest way to use this is to generate your Gcode elsewhere (using Cura or other slicing software), copy the files to an SD card, and print via the printer's front panel.
See the Monoprice MP Select Mini article for operation information- they're similar.
duplicator_i3_plus_3d_printer.1515045680.txt.gz · Last modified: 2018/01/04 01:01 by sdh7