creality_ld-002r
This is an old revision of the document!
Creality LD-002R
| Name | Creality LD-002R |
|---|---|
| Owner | Makers' Alliance |
| Location | 3D Printing |
| Training needed | Yes |
| Hackable | No |
| Model | UNKNOWN |
| Serial | UNKNOWN |
| Arrival Date | 10/18/2022 |
| Working | Yes |
| Contact | Sam Harmon |
Current Status: Fully Functional
This is a Creality LD-002R SLA 3D Printer.
Unlike the Monoprice SLA, this printer requires external slicing software. Some available options are:
There's also no way to automatically send a print to the printer. Slice it to the USB stick and then put the stick in the printer. At some point in the future, we may set up a dedicated Pi or Pi Zero 2 with the Octoprint-Chituboard plugin (it has to be wired directly to the printer's motherboard, so we can't use the Octoprint Farm computer)
creality_ld-002r.1666806542.txt.gz · Last modified: 2022/10/26 13:49 by sdh7