casting_furnace
Casting Furnace
| Name | Casting Furnace |
|---|---|
| Owner | Makers' Alliance |
| Location | Shop Zone |
| Training needed | yes |
| Hackable | yes |
| Model | DIY |
| Serial | N/A |
| Arrival Date | 2013 |
| Working | yes |
| Contact | Nathan Clark |
Current Status: needs work
In 2013, we built a casting furnace, for casting aluminum and brass.
It is EXTREMELY heavy, in (3? 4?) stacking pieces, and requires two people with steel rods to lift the individual pieces.
At present most of the parts are on a cart in the Shop Zone.
To Do List:
- Make a rolling stand for it. Use steel tubing & cast iron casters to build one.
casting_furnace.txt · Last modified: 2017/01/13 01:58 by sdh7