bigcnc
This is an old revision of the document!
Aka, “Son of Junior”
The intention is to build a CNC router capable of manufacturing a guitar body.
Effective table area of approximately 24“x48”.
Current Status: Still largely in planning, but we're playing with some design options based around things we already have or can make/acquire easily.
X-axis: Current thought is to use the “Sears Axis”, or possibly cut-down supported rails.
Y-axis: Current thought is to use the 1/2“ supported rails, along with cast blocks. Not sure of the drive mechanism yet.
X-axis: possibly using a leadscrew from the optical mechanism we acquired with the “Sears Axis”, and some of the linear rails on hand.
Electronics: still unknown.
bigcnc.1477847478.txt.gz · Last modified: 2017/01/08 20:10 (external edit)