Differences

This shows you the differences between two versions of the page.

--- vertical_bandsaw [2018/11/28 06:20] – sdh7
+++ vertical_bandsaw [2019/01/04 16:59] (current) – sdh7
@@ Line 12: / Line 12: @@
 ^Contact| Sam Harmon|
-Current Status: Needs a lot of work, but does power up
+Current Status: Functional, but still needs a lot of work.
 Additional Information
 This was a donation from Akron Makerspace. It's a Bett-Marr 14S, vintage 1942-1956 (or maybe later?). Motor is dated 1986.
   * <del>Needs power cord (12/3, as it's a 16 A motor)</del> Fixed, though plug is 15A for now.
@@ Line 21: / Line 22: @@
   * There's sort-of a bodged welding job that needs to be ground off, have rust cleaned off and re-welded.
     * This has been worked around for now, but long-term should be fixed better
-  * Blade should be replaced (note inside door says 95 1/2" x 1/2" wide x 0.025" thick)
+  * <del>Blade should be replaced (note inside door says 95 1/2" x 1/2" wide x 0.025" thick)</del>
   * <del>Remove the light attachment - it's a mess and not helping anything</del>
   * Add a guard to the belt/chain mechanism