Differences

This shows you the differences between two versions of the page.

--- ryobi_bench_grinder [2017/01/08 19:55] – created sdh7
+++ ryobi_bench_grinder [2018/11/09 19:24] (current) – sdh7
@@ Line 1: / Line 1: @@
+=====Bench Grinder=====
+^Name| Ryobi 6" Bench Grinder|
+^Owner | Sam Harmon |
+^Location | Shop Zone |
+^Training needed| yes|
+^Hackable| no|
+^Model| |
+^Serial| |
+^Arrival Date| January 7th, 2017|
+^Working| yes|
+^Contact| Sam Harmon|
+Current Status: Fully Functional. Should be mounted to something.
 A Ryobi 6" Bench Grinder
-Currently has the two grinding stones (one sort of coarse, one finer) it came with installed. We should get a wire wheel for aluminum finishing as well.
+Currently has the fine wheel on the left, and a wire wheel on the right.
 Works well, but motor is a little slow to start up. Give it a good 15-30 seconds before grinding.
 Notes:
-*DO NOT USE THE GRINDING STONES ON ALUMINUM. IRON/STEEL ONLY.
+  *DO NOT USE THE GRINDING STONES ON ALUMINUM. IRON/STEEL ONLY. USE THE WIRE WHEEL ON ALUMINUM. DON'T BE THAT PERSON. ALUMINUM GUMS UP GRINDING STONES AND THEY HAVE TO BE RE-DRESSED.
+  *Don't use the thicker Harbor Freight wire wheel. It doesn't spin very well in the grinder. Use the Avanti wire wheel (currently installed)
+To-Do List
+  * Mount it to a bench or moveable stand
-Current Status: Fully Functional, but really should be bolted to a bench.
+{{tag>[]}}