ryobi_bench_grinder
This is an old revision of the document!
A Ryobi 6“ Bench Grinder
Currently has the two grinding stones (one sort of coarse, one finer) it came with installed. We should get a wire wheel for aluminum finishing as well.
Works well, but motor is a little slow to start up. Give it a good 15-30 seconds before grinding.
Notes: *DO NOT USE THE GRINDING STONES ON ALUMINUM. IRON/STEEL ONLY.
Current Status: Fully Functional, but really should be bolted to a bench.
ryobi_bench_grinder.1483905302.txt.gz · Last modified: 2017/01/08 14:55 by sdh7