Differences

This shows you the differences between two versions of the page.

--- reprap [2016/10/30 18:27] – ma_wikiadmin
+++ reprap [2018/08/08 04:34] (current) – sdh7
@@ Line 7: / Line 7: @@
 Next plan: maybe get some extruder cleaning filament, and try printing again with filament that isn't five years old...
-To use: This RepRap requires a USB connection to a computer. The computer next to it (the [[MaxNC]] computer) has Repetier-Host installed, but it pegs the CPU when running. You're probably better off with your own laptop, or we'll try to get Octoprint installed on a Raspberry Pi.
+To use: This RepRap requires a USB connection to a computer. <del>The Raspberry Pi in the printed case near it has Octoprint installed. When it's running and connected to the [[MakerNet]] network, you can access that at [[http://octoprint.local|octoprint.local]].</del>