reprap
This is an old revision of the document!
This RepRap has been a work-in-progress for quite a while.
Current Status: in late 2015, it did print something that actually resembled an object.
In mid-2016 it again printed something that resembled what it was supposed to. And then promptly didn't after that one (extruder clogged?)
Next plan: maybe get some extruder cleaning filament, and try printing again with filament that isn't five years old…
To use: This RepRap requires a USB connection to a computer. The computer next to it (the MaxNC computer) has Repetier-Host installed, but it pegs the CPU when running. You're probably better off with your own laptop, or we'll try to get Octoprint installed on a Raspberry Pi.
reprap.1477852029.txt.gz · Last modified: 2016/10/30 18:27 by ma_wikiadmin