vidiffektor
no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
| — | vidiffektor [2018/08/22 11:23] (current) – created sdh7 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | This just covers the basic assembly. If you're putting this in another enclosure, you're on your own... | ||
| + | |||
| + | * Resistors - This kit uses 1% tolerance resistors (blue body, brown tolerance band), and are kind of different than the usual 5% resistors you see | ||
| + | * 470 ohm (yellow-violet black brown brown) | ||
| + | * 2.2 Kohm (red-red- black...) | ||
| + | * 1 k (3) (brown-black black ...) | ||
| + | * Diodes - 1n4001 (black w/silver stripe), and 1N4148 (glass body, w/black stripe) | ||
| + | * IC sockets - one is 16 pin, one is 14 pin. Note the orientation, | ||
| + | * LED - flat side on the silkscreen corresponds to the short leg of the LED (or flat side of the LED) | ||
| + | * DC input jack - solder in one pin first and re-align if necessary. Solder in remaining pins | ||
| + | * RCA jacks | ||
| + | * Pots - B0502 (5k x2) B0503 (50K) B0102 (1k x2) | ||
| + | * Standoff " | ||
| + | * Insert ICs (LM339 (14 pin), 4040 (16 pin) | ||
| + | * Apply power (6-12V, tip positive) - we tested varying power supplies, and got good performance down to 6V. At 4.5V, some color detail was lost. We didn't attempt to try lower power settings or a " | ||
| + | * Hook up your input & output and you're done! Have fun vidiffekting! | ||
vidiffektor.txt · Last modified: 2018/08/22 11:23 by sdh7