Differences

This shows you the differences between two versions of the page.

--- vacuum_former [2017/01/23 15:46] – sdh7
+++ vacuum_former [2018/07/27 11:50] (current) – sdh7
@@ Line 12: / Line 12: @@
 ^Contact| Sam Harmon|
-Current Status: Fully Functional
+Current Status: Would require re-assembly
 In January 2017, we designed and built a small Vacuum Former. 8x10"-ish build area. Using the [[Oven]] as the heat source, and either a vacuum motor or shopvac as the vacuum source.