User Tools

Site Tools


uv_curing_lamp

UV Curing Lamp

Name UV Curing Lamp
Owner Makers' Alliance
Location 3D Printing
Training needed No
Hackable No
Model MelodySusie
Serial UNKNOWN
Arrival Date UNKNOWN
Working Yes
Contact Sam Harmon

Current Status: Fully Functional

A UV lamp normally intended for gel nail polish, this device works pretty well for curing SLA 3D prints. It has a couple of timed modes - one is two minutes, the other 30 minutes. The 30 minute setting run a couple of times should be sufficient for curing most SLA prints.

May also be useful for UV glues and/or PCB exposure, but untested for these uses.

There is a spare UV bulb in with the SLA Printing Supplies.

uv_curing_lamp.txt · Last modified: 2019/07/10 11:22 by sdh7

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki