ryobi_bench_grinder
Bench Grinder
| Name | Ryobi 6“ Bench Grinder |
|---|---|
| Owner | Sam Harmon |
| Location | Shop Zone |
| Training needed | yes |
| Hackable | no |
| Model | |
| Serial | |
| Arrival Date | January 7th, 2017 |
| Working | yes |
| Contact | Sam Harmon |
Current Status: Fully Functional. Should be mounted to something.
A Ryobi 6” Bench Grinder
Currently has the fine wheel on the left, and a wire wheel on the right.
Works well, but motor is a little slow to start up. Give it a good 15-30 seconds before grinding.
Notes:
- DO NOT USE THE GRINDING STONES ON ALUMINUM. IRON/STEEL ONLY. USE THE WIRE WHEEL ON ALUMINUM. DON'T BE THAT PERSON. ALUMINUM GUMS UP GRINDING STONES AND THEY HAVE TO BE RE-DRESSED.
- Don't use the thicker Harbor Freight wire wheel. It doesn't spin very well in the grinder. Use the Avanti wire wheel (currently installed)
To-Do List
- Mount it to a bench or moveable stand
ryobi_bench_grinder.txt · Last modified: 2018/11/09 14:24 by sdh7