plasma_cutter
This is an old revision of the document!
Plasma Cutter
| Name | Plasma Cutter |
|---|---|
| Owner | Dave Walton |
| Location | Shop Zone |
| Training needed | yes |
| Hackable | no |
| Model | Model Number |
| Serial | Serial Number |
| Arrival Date | 2012 |
| Working | yes |
| Contact | Dave Walton |
Current Status: Fully Functional
A plasma cutter, Manufactured by Harbor Freight Tools.
Notes:
- Requires an Air compressor to operate.
- Runs on 220V
Safety Considerations:
- Training required before using this tool
- All Plasma Cutting operations must be done outside per Shaker Heights Fire Department (sorry!)
- YOU MUST WEAR APPROPRIATE SAFETY ATTIRE: Helmet, gloves, full sleeves of appropriate material, etc.
plasma_cutter.1484087224.txt.gz ยท Last modified: 2017/01/10 22:27 by sdh7