This is an old revision of the document!
Necchi Sewing Machine
| Name | Necchi Sewing Machine |
|---|---|
| Owner | Makers' Alliance |
| Location | Textiles |
| Training needed | yes |
| Hackable | yes |
| Model | BU |
| Serial | U140197 |
| Arrival Date | 2015 |
| Working | yes |
| Contact | Sam Harmon |
Current Status: Ran, but pedal mechanism did not start/stop. Needs electrical work.FIXED
1/29/2017 - Replaced badly decayed cord in plug/pedal mechanism. Seems to be working better. Pedal should probably have a base added. Plug part is now plugged into a cheapo surge protector that's kind of holding the whole thing together. Whole assembly should probably be reworked, but this will get it moving. Replacement motor/pedal might be a good idea too (already on hand, though lamp would have to be wired differently).
Pedal works by taking hot of line, and running through one of 5 or six resistances, and back out to drive motor.
8/5/2017 - Bobbin winding does work, though the lever needs to be lifted by hand when doing so. (only with Singer-style bobbins. Necchi(?)-style bobbins seem to hold correctly…
8/08/2017 - Laying a zigzag stitch was accomplished!