Differences

This shows you the differences between two versions of the page.

--- move_punchlist [2018/04/18 10:51] – sdh7
+++ move_punchlist [2023/10/04 15:36] (current) – we finished the move some time ago, and something like 99% of these tasks have been done... sdh7
@@ Line 1: / Line 1: @@
-April 2018 - We are moving from The Dealership to IngenuityLabs at the Hamilton Collaborative.
-Tasks remaining to be done:
-  * <del>Contain things into containers</del>
-  * <del>Disassemble shelves into whatever size needed for transport</del>
-  * Call scrap hauling guy to haul away total junk we don't want. (still a ways off...)
-==PRIORITY OF STUFF TO MOVE==
-   * Almost everything moved at this point
-   * Trash cans
-   * 2 chairs
-   * misc stuff - not much left
-Things to do at Hamilton:
-  * Clean up debris in corner of pod. PPE suggested.
-  * Paint right wall of pod
-  * <del>Use APC PDU to convert 240 to 120?</del> Double-check the specs, and it would likely need some kind of extension cord to access outlet on the ceiling (estimated budget for 30' cord - ~$100, probably a little under that)
-    * Probably not - Max voltage input on the "PDU" is 230V, service is 240v. If service was 208V we'd be in business.
-  * Get a generator cable to split the 240 to 2x120 - costs about $35.
-  * Replace fluorescent light with LED (budget: $40/each for 3200 Lumen units)
-    * Plan B- replace fluorescent tubes w/LED Drop-in replacements($7-10 each)
-  * pour concrete where the boards cover the void in the floor? Is that allowed?
-  * Run ethernet cable to Soulcraft/AO router - coordinate before plugging anything in...
-  * A stepstool/short ladder to reach shelf tops? We'll have to better utilize shelf top space - no more empty boxes lining the shelves if we can help it...
-  * Flooring? The floor in our pod is basically wood block. Cover it with something?
-Timeline:
-  * Monday, 4/23-Friday, 4/27 - Sam is available all week for whatever is left
-  * Saturday, 4/28 - Shaker Makers?
-  * Sunday, 4/29 - Anything left?
-  * Tuesday, 5/1 - Deadline for everything out