Makers' Alliance Wiki

• Almost everything moved at this point
• Trash cans
• 2 chairs
• misc stuff - not much left

Things to do at Hamilton:

• Clean up debris in corner of pod. PPE suggested.
• Paint right wall of pod
• Use APC PDU to convert 240 to 120? Double-check the specs, and it would likely need some kind of extension cord to access outlet on the ceiling (estimated budget for 30' cord - ~$100, probably a little under that)
  • Probably not - Max voltage input on the “PDU” is 230V, service is 240v. If service was 208V we'd be in business.
• Get a generator cable to split the 240 to 2×120 - costs about $35.
• Replace fluorescent light with LED (budget: $40/each for 3200 Lumen units)
  • Plan B- replace fluorescent tubes w/LED Drop-in replacements($7-10 each)
• pour concrete where the boards cover the void in the floor? Is that allowed?
• Run ethernet cable to Soulcraft/AO router - coordinate before plugging anything in…
• A stepstool/short ladder to reach shelf tops? We'll have to better utilize shelf top space - no more empty boxes lining the shelves if we can help it…
• Flooring? The floor in our pod is basically wood block. Cover it with something?

Timeline:

• Tuesday, 4/10 - Prep Session
• Saturday, 4/14 - MOVE SESSION
• Sunday, 4/15 - MOVE SESSION
• Tuesday, 4/17 - Prep Session (anything left?)
• Saturday, 4/21 - MOVE SESSION? (someone else would have to run)
• Sunday, 4/22 - MOVE SESSION? (someone else would have to run)
• Monday, 4/23-Friday, 4/27 - Sam is available all week for whatever is left
• Saturday, 4/28 - Shaker Makers?
• Sunday, 4/29 - Anything left?
• Tuesday, 5/1 - Deadline for everything out