User Tools

Site Tools


maxnc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
maxnc [2019/07/09 14:25] sdh7maxnc [2022/10/26 10:42] (current) – Moved it to the wood shop last night sdh7
Line 3: Line 3:
 ^Name| MaxNC 10| ^Name| MaxNC 10|
 ^Owner | Makers' Alliance| ^Owner | Makers' Alliance|
-^Location | Electronics|+^Location | Wood Shop|
 ^Training needed| yes| ^Training needed| yes|
 ^Hackable| no| ^Hackable| no|
Line 14: Line 14:
 Current Status: Mostly Functional Current Status: Mostly Functional
  
-This is a donated MaxNC 10 CL that has been hacked into functionality. MaxNC electronics have been replaced by an Arduino/gShield combo running GRBL. All of the stepper motors on the X/Y/Z axes have been replaced. Technically the machine has a 4th (rotary) axis, but the current electronics do not support it.+This is a donated MaxNC 10 CL that has been hacked into functionality. MaxNC electronics have been replaced by an Arduino/gShield combo running GRBL (so it's no longer Closed Loop). All of the stepper motors on the X/Y/Z axes have been replaced. Technically the machine has a 4th (rotary) axis, but the current electronics do not support it.
  
 ===Current Status:===  ===Current Status:=== 
-90+% usable at this point, but be careful.(see Caveats)+  *90+% usable at this point, but be careful.(see Caveats) 
 +  *Could use some signage in its new home in the wood shop 
 +  *Need to set up the computer next to it to operate it, or BYO laptop...
  
 ===Caveats:===  ===Caveats:=== 
maxnc.txt · Last modified: 2022/10/26 10:42 by sdh7

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki