User Tools

Site Tools


k40_laser_engraver

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
k40_laser_engraver [2018/11/20 14:35]
sdh7
k40_laser_engraver [2019/02/14 17:32]
sdh7
Line 48: Line 48:
   * Wood (engraving) - 8% does a fine job on the random wood pieces we've tested with.   * Wood (engraving) - 8% does a fine job on the random wood pieces we've tested with.
   * wood (cutting) - 11% was sufficient to cut 3mm baltic birch plywood?   * wood (cutting) - 11% was sufficient to cut 3mm baltic birch plywood?
-  * Acrylic - 25% was great for engraving, but slightly insufficient for cutting (the cut edges did snap off easily, though)+  * Acrylic - 25% was great for engraving, but slightly insufficient for cutting (the cut edges did snap off easily, though). 33-35% should be good for cutting at 10mm/s.
  
  
Line 55: Line 55:
   * <del>Fire Extinguisher</del> done   * <del>Fire Extinguisher</del> done
   * Air assist (pump acquired, need to get tubing/fittings/etc.)   * Air assist (pump acquired, need to get tubing/fittings/etc.)
-  * honeycomb base (http://www.scorchworks.com/Blog/spring-loaded-k40-laser-platform/ for a good way to do it)+  <del>* honeycomb base (http://www.scorchworks.com/Blog/spring-loaded-k40-laser-platform/ for a good way to do it)</del> done
   * <del>Thermometer & flow meter for cooling pump (i.e. https://www.amazon.com/Thermometer-Cooling-Liquid-Cooler-System/dp/B074SDFW51/ref=sr_1_3?s=electronics&ie=UTF8&qid=1521656040&sr=8-3&keywords=LED+Thermometer+3+Way+Flow+Meter+FlowMeter+For+Water+Cooling+Liquid+Cooler+System)</del> ordered   * <del>Thermometer & flow meter for cooling pump (i.e. https://www.amazon.com/Thermometer-Cooling-Liquid-Cooler-System/dp/B074SDFW51/ref=sr_1_3?s=electronics&ie=UTF8&qid=1521656040&sr=8-3&keywords=LED+Thermometer+3+Way+Flow+Meter+FlowMeter+For+Water+Cooling+Liquid+Cooler+System)</del> ordered
   *<del> improved chiller pump</del> done   *<del> improved chiller pump</del> done
k40_laser_engraver.txt ยท Last modified: 2021/07/13 19:24 by sdh7