hot_air_rework_station
This is an old revision of the document!
Hot Air Rework Station
| Name | Hot Air Rework Station |
|---|---|
| Owner | Makers' Alliance |
| Location | Electronics |
| Training needed | no |
| Hackable | no |
| Model | 850A |
| Serial | |
| Arrival Date | 2014 |
| Working | yes |
| Contact | Sam Harmon |
Current Status: Fully Functional
An Aoyue 850 SMD hot-air station. Probably used more for heat-shrink than SMD 
In the source below, just replace “templates” with a space-separated list of the tags you want.
hot_air_rework_station.1484025890.txt.gz · Last modified: 2017/01/10 05:24 by sdh7