User Tools

Site Tools


duplicator_i3_plus_3d_printer

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
duplicator_i3_plus_3d_printer [2018/01/04 01:00] – Created from the form at tool_submission_form sdh7duplicator_i3_plus_3d_printer [2022/10/26 11:10] (current) – update with current condition. sdh7
Line 9: Line 9:
 ^Serial| UNKNOWN| ^Serial| UNKNOWN|
 ^Arrival Date| UNKNOWN| ^Arrival Date| UNKNOWN|
-^Working| Yes|+^Working| No|
 ^Contact| Sam Harmon| ^Contact| Sam Harmon|
  
-Current Status: Fully Functional+Current Status: Broken. Needs major refurb: 
 +  *Leveling issues 
 +  *alignment issues 
 +  *Adhesion issues 
 +  *X-axis has a weird "lump" sometimes causing prints any larger then a 20mm calibration cube to be offset per-layer. 
 +  *Y-axis limit switch was somehow damaged?
  
-Current workhorse printer at the space.+<del>Current workhorse printer at the space.</del>
  
 Print area: 200x200x200 mm (approx) Print area: 200x200x200 mm (approx)
  
-Could maybe use a bed leveling.+
  
 The easiest way to use this is to generate your Gcode elsewhere (using Cura or other slicing software), copy the files to an SD card, and print via the printer's front panel. The easiest way to use this is to generate your Gcode elsewhere (using Cura or other slicing software), copy the files to an SD card, and print via the printer's front panel.
  
-See the [[Monoprice MP Select Mini 3D Printer]] article for operation information- they're similar.+Filament-wise, we've used PLA approximately 99% of the time on this one. We have done a little PETG, but never ABS or more exotic filaments 
 + 
 +See the [[Monoprice MP Select Mini]] article for operation information- they're similar. 
 + 
 +Modifications: 
 +  * The hotend was upgraded to a Micro-Swiss all-metal hotend. The nozzle is "plated brass", so extended amounts of glow in the dark filament may not be the best idea until we get an all-stainless or something else. 
 +  * The extruder cooling fan has been replaced several times (note: it's a 24 V fan) 
 + 
 +Slicer configuration: 
 +  * For the most part, Cura's defaults are fine- set the size to 200x200x200 (or use their canned Prusa i3 profile) 
 + *Nozzle diameter: 0.4 mm (this is actually the default, but noting it for now in case it changes in the future) 
 + *Enable Retraction 
 +  * Retraction distance: .6mm (this is important with the all-metal hotend) 
 + * Bed Temperature: 45
  
-{{tag>[ needs_calibration   needs_details]}}+{{tag>[ needs_calibration, needs_minor_repair,needs_details]}}
duplicator_i3_plus_3d_printer.1515045600.txt.gz · Last modified: 2018/01/04 01:00 by sdh7

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki