Makers' Alliance Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=====DaVinci XYZ 1.0=====

^Name| DaVinci XYZ 1.0|
^Owner | Makers' Alliance |
^Location | 3D printing |
^Training needed| No|
^Hackable| No|
^Model| XYZ 1.0|
^Serial| -|
^Arrival Date| 6/1/2021|
^Working| Yes|
^Contact| Makers' Alliance|

Current Status: Needs Calibration

Updated the stock firmware to [[https://github.com/luc-github/Repetier-Firmware-4-Davinci|Repetier 0.92]], so it no longer needs chipped filament (Yay!). 

Now part of the [[Octoprint]] farm - http://octoprint.local:8084

For your Cura Profiles:
Start Gcode:
<code>
G28
</code>

End Gcode:
<code>
M104 S0
M140 S0
G91
G1 F150
G1 Z10
G90
G28 X0
G28 Y0
M8
</code>

Build Envelope is 200x200x200. Gcode Flavor is Repetier.

Also note that the build platform is a little backwards compared to the other printers- the origin is the back left of the print bed, so prints will be "mirrored" relative to where you put them in Cura.

{{tag>[needs_maintenance needs_calibration   ]}}