=====TO DO LIST===== ====THINGS YOU CAN BRING THAT WOULD HELP==== * "Shoe Box"-style plastic boxes. Nicer ones from Home Depot or even dollar store ones. We're not picky. If we had 20 of these show up, I'm sure we'd find a use for at least 20 more. We have plenty of these at the moment. * IEC power cables? Our stash is getting a little low... ====Next Makerspace Maintenance Punch List **(10/19)**==== * Clear off main two tables, and refresh the paper tops (DO FIRST) * Take garbage to dumpster (DO SECOND) * Improved shelving around the back of the space? - we have some pieces of 2x10 that might be useful for this... * Re-work back wall in general - move speakers to corners for better separation(?) and to free up space there. * the i3 needs its BuildTak replaced. We have it, just need to do it... * Deep cleaning & organizing at the Electronics Station * Paint Marker an "MA" on tools that don't have it, so that they're easier to identify * Reorganize green tool shelf - re-optimize cubbies to make more sense * Set aside two cubbies for measuring tools * Re-label new cubbies by use * Finding things: * The bin of USB Micro/C/Lightning cables * The Ryobi Multitool body - we have a head for it now, but the body is AWOL * Pen turning stock * Chain & combination lock * Go through the Pallet Racks a little bit - clean up/consolidate where possible * Assuming some space is freed up here, move some extraneous things into it as "deep storage" (i.e. all but one of the totes of "wire bundles", etc.) * A general going-through of the shelves: * Consolidate things that need to be consolidated * Purge things that need to be purged * label things that need to be labeled * Label cabinets in the Shop Zone based on what's inside each door * disc/strip sander needs a new sanding belt (1x30?) - belts purchased, just need to install... * Turns out it's 1x42". Ross may have some, or we can order more. * Build a little stand for the [[Monoprice SLA Printer]], such that the [[UV Curing Lamp]] sits under it (with a little extra space for curing taller parts. * Bonus - add a translucent acrylic window on hinges to cover the lamp area - the laser cutter should be able to handle that size... * Double bonus - fix the SLA printer vat... * Take apart the Hot air station and see if the pump can be repaired or replaced. * Good news - pump does work if "AIR" pot is turned all the way up. Errant pot looks like a 500k... ====General Space Infrastructure==== * General cleanup (i.e. the kind of thing that should happen frequently- every week or three...) * Empty garbage into dumpster (all of the cans, so we can fill them up again) * Tidy all workbench surfaces * Shelf organization/labeling * Keep generally similar things together. If something's in the wrong place, get it to the right (or at least a right-er) place. * Contain loose things into containers where possible * LABEL BOXES/CONTAINERS/SHELVES: just use a piece of masking tape & a Sharpie. * literally work on anything on the [[fixme list]] * Use the [[Vinyl Cutter]] to make a magnetic sign for the outside door. * Sort bins of random stuff into where the random stuff actually goes * Improved lighting? * Improved doors with hinges for the pallet racks? (4x8 sheets of plywood, maybe with some edging so they don't flop apart?) ====Shop Zone==== * Tool organization - any improvements are welcome! * Electrical wiring for the "new" 220V stick welder (convert its plug to something better? L6-30? - check with John K.?) * Build a nice table add-on/fence for the [[Enco Drill Press]]? * Measure T-slot nuts for the [[Enco Drill Press]]. See of additional ones are available, or maybe make some. * Implement Dust Collection Station? ===="Hardware" Wall==== * Fastener Organization & labeling ====Electronics/Digital Zone (general)==== * Install a set of standardized tools onto laptops * Arduino IDE * Cura * SignBlazer Elements (it's effectively free, but not a good as VinylMaster...) * Pronterface (handy-er for debugging DIY printers than Cura?) * Inkscape (useful for designing stuff for the vinyl cutter) * Salae Logic * K40 Whisperer * bCNC? * The Easel Connector for CNCing from the web browser * Other software? * Maybe first get all of these installers onto a USB stick, so they can be done all at once. ====Computers/Digital Fabrication==== * DesignJet printer really needs a dust cover, since it gets completely clogged up with dust and debris when not in use. (would still be nice, but less critical now?) * Complete [[RepRap Snappy]] * Make some kind of filament storage solution? (clear plastic tote w/holes & gaskets, and a bunch of color-changing silica gel??) * Figure out steps needed to make the [[K40 Laser Engraver]] chooch safely & reasonably * Move the surge strip powering that stuff to the front of the cart. * Add an Emergency stop? * Figure out water pump/alarm stuff (short version: water pump is running, but flow alarm is triggering? need better pump? replace alarm? right now alarm is shorted out in order to test functionality...) * Add air assist air assist was kind of a bust - it's loud, the hose got in the way, didn't help all that much, and then the air nozzle got burned up... ====Electronics==== * Organize components better? * Organize electronics tools better - electronics bench is a good start at this... * Figure out power supply pinout for prototyping station. - We have a picture of the pinout. Fabricobble a replacement or otherwise find one. ====AV Stuff==== * Figure out condition of donated microphones - parts needed? parts available? ====This Wiki==== * Update entries that need updating * Delete entries that need to be deleted * Add entries that need to be added (use the [[Tool Submission Form]] for [[Equipment]]) * Add photos to [[Equipment]] entries? **(Good for a first timer!)** * Add/Update instructions for [[Equipment]] entries ====Office/Organizational==== * Alphabetize waivers? Seems like a good idea in case someone can't remember if they did one or not? ====Miscellaneous==== * Inventory First Aid supplies. Make list of recommended additions and/or replacements for anything missing. * There are OSHA guidelines for what should be in one for various group sizes. * Repair the rolling cart - I kind of tried epoxy but it didn't seem to work. Weld? Bolt? ====Long Term/Not any time soon==== * More/better shelving? * More improved use of vertical space? (not sure how to accomplish this without stairs/ladders) * Any new shelving project should have a budget, rough drawing, and an explanation of where it will go... * Build a wheeled cart for the [[Casting Furnace]]? * We'd need cast iron/steel casters. We should have sufficient steel tubing? * Priority: low