=====Shopsmith Mark V===== ^Name| Shopsmith Mark V| ^Owner | Makers' Alliance | ^Location | Shop Zone | ^Training needed| yes| ^Hackable| no| ^Model| Mark V| ^Serial| UNKNOWN| ^Arrival Date| 2014| ^Working| yes| ^Contact| Sam Harmon| Current Status: Partially functional. Speed changing is complicated at the moment. Needs a new dial. An original Shopsmith Mark V (1955-1962? Vintage), with Bandsaw and Beltsander, Table saw, Scroll saw, and other tooling. Functions tested and working: *Belt sander *Bandsaw *Disc Sander Functions of unknown usability: * Wood Lathe * Would need a faceplate ($25-35, depending on size) and MT2 tailstock center ($20-40 from shopsmith, or probably less on ebay). Other options would be a chuck or spur center. * We have a couple of MT2 live centers for the tailstock. * Table saw * We have a number of (old, rusty, scary) blades. I have not seen a table saw arbor anywhere in the box of shopsmith accessories we have (a new one will be $31.99) * Quite frankly, it's not really worth using the table saw on this- we have two other table saws that are probably better. * Drill Press/horzintal boring * We do have the drill chuck & key. untested. * Using a a drill press is probably a pain compared to using one of the other drill presses at the space due to the setup involved. However, if you need to horizontally bore something big, this may be a good method to do so. * Scroll saw * This has leaked an enormous amount of oil. ??? * We have another scroll saw. Notes: *Beltsander belts are 6"x 48" - have a couple from Harbor Freight. *Bandsaw blades are 72". We have one spare in the packaging currently. *Disc sander is 12" *Belt should be replaced soon ($20 - http://www.shopsmith.com/service/svc_dtl.htm?item=521682&num=113) * There are two belts, actually- the drive belt(regular V-belt) and a second belt that is a Gilmer (this machine is pre-1962). Replacement sets of two belts can be ebayed. {{tag>[needs_details needs_maintenance needs_major_repair]}}