=====Bench Grinder=====

^Name| Ryobi 6" Bench Grinder|
^Owner | Sam Harmon |
^Location | Shop Zone |
^Training needed| yes|
^Hackable| no|
^Model| |
^Serial| |
^Arrival Date| January 7th, 2017|
^Working| yes|
^Contact| Sam Harmon|

Current Status: Fully Functional. Should be mounted to something.

A Ryobi 6" Bench Grinder

Currently has the fine wheel on the left, and a wire wheel on the right.

Works well, but motor is a little slow to start up. Give it a good 15-30 seconds before grinding.

Notes:
  *DO NOT USE THE GRINDING STONES ON ALUMINUM. IRON/STEEL ONLY. USE THE WIRE WHEEL ON ALUMINUM. DON'T BE THAT PERSON. ALUMINUM GUMS UP GRINDING STONES AND THEY HAVE TO BE RE-DRESSED.
  *Don't use the thicker Harbor Freight wire wheel. It doesn't spin very well in the grinder. Use the Avanti wire wheel (currently installed)

To-Do List
  * Mount it to a bench or moveable stand

{{tag>[]}}