=====JET Band Saw=====

^Name| JET Band Saw|
^Owner | Makers' Alliance |
^Location | Shop Zone |
^Training needed| yes|
^Hackable| no |
^Model| HVBS-56M|
^Serial| |
^Arrival Date| December 2015|
^Working| yes|
^Contact| Sam Harmon|

Current Status: Functional, but could use work

In December 2015, we acquired a JET horizontal metal-cutting band saw from HGR.

Model Number: HVBS-56M

Blade Size: 1/2” x 0.025” x 64-1/2”

Belt size: A22 V Belt

Currently sitting on a rolling bench, which has been good enough for our use.

Work needed:
  *Replace blade - one on it is working for now
  *Construct a stand for it and/or temporarily attach to existing bench 
    *http://www.machinistblog.com/4x6-bandsaw-cart/
  *A good cleaning & maintenance wouldn't hurt

Future modifications:
  *Acquire/construct parts needed for vertical use? (table, and bracket to hold table in place)
    *http://www.machinistblog.com/a-table-for-vertical-cutting-on-the-jet-5x6%E2%80%9D-band-saw/
  *Chip brush: http://www.machinistblog.com/a-chip-brush-for-the-jet-5x6-bandsaw/

{{tag>[needs_minor_repair needs_details needs_maintenance]}}