Makers' Alliance Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====Vinyl Cutter=====

^Name| Vinyl Cutter|
^Owner | Makers' Alliance |
^Location | Fabrication Zone |
^Training needed| Yes|
^Hackable| No|
^Model| USCutter MH-721 Mk2|
^Serial| UNKNOWN|
^Arrival Date| 11/18/2017|
^Working| Yes|
^Contact| |

Current Status: Fully Functional

How to use: i3 has some details on their wiki that might be helpful: https://www.i3detroit.org/wiki/Vinyl_Cutter-US_Cutter_Refine_MH-720

The original Windows software that came with it should be on the Windows workstation.

We've had some limited success using InkCut on the Linux workstation, while using a USB to serial adapter and the 9-pin serial cable that came with the cutter. We'll get it added to the OS's launcher (and add the Inkcut plugin for Inkscape), but in the meantime "python3 -m inkcut" will get you started. You'll want to design your thing-to-cut in Inkscape and make sure to convert the objects to paths before saving it and then loading it in Inkcut.

I attempted using Inkcut on my old Macbook Pro, but the cutter setup dialog wanted to be taller than my display's height, so I could never save the cutter config. 

We keep a limited amount of vinyl on hand (currently: white, black, and a special sandblast resist). If you need something specific (certain color, heat transfer vinyl, etc.), you can source material at the following places:
  * USCutter
  * the usual online suspects (ebay, etc.)
  * Jo-Ann (retail)
  * Michael's (retail)

Retail stores typically just have 12" rolls/sheets. If you want 24" material you'll probably have to go online.


{{tag>[    needs_details]}}