Makers' Alliance Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=====Table Saw=====

^Name| Table Saw|
^Owner | Makers' Alliance |
^Location | Shop Zone |
^Training needed| yes |
^Hackable| no|
^Model| Model Number|
^Serial| Serial Number|
^Arrival Date| 2016|
^Working| yes |
^Contact| Ian |

Current Status: Fully Functional

A Craftsman Limited Edition Table Saw with extension table and other goodies.

There is also currently an outfeed table created out of two workmate benches and a wooden sheet. Very handy for large jobs.

Could use a guard. Check the model number and see if one is available either via Sears Parts Direct or a third party.

Potential upgrade: Replace the stand with with a rolling cart with folding outfeeds and a dust collection tray/port. Current Stand isn't so hot, and some of the plastic connection points on the saw have broken off (now held to the stand with clamps)

Blade could be sharpened/replaced.

{{tag>[needs_details]}}