Makers' Alliance Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{ :0:ender3.jpeg?400|}}
=====Creality Ender 3=====

^Name| Creality Ender 3|
^Owner | Makers' Alliance |
^Location | 3D printing shelf |
^Training needed| Yes|
^Hackable| No|
^Model| Ender 3|
^Serial| UNKNOWN|
^Arrival Date| UNKNOWN|
^Working| Yes|
^Contact| Sam Harmon|

Current Status: Usable

Specifications:
  * Build volume: 220x220x250mm (approx)
  * Materials: PLA, PETG, possibly others

An Ender 3 with some modifications:
  * Main board updated to an SKR mini V3
  * Running Klipper, with a Raspberry Pi running mainsail for control
  * USB Webcam
  * Power supply upgraded to Meanwell, and moved underneath printer
  * Creality Spider V3 hotend
  * Glass build plate
  * Dual Z-axis
  * ...and more! 

Unlike the other printers with the [[Octoprint]] farm, this printer uses Klipper and Mainsail for control. To print to it, navigate to ender3.local on the MakerNet network (more details later)

To send to it automagically via Cura, you'll want the [[https://marketplace.ultimaker.com/app/cura/plugins/emtrax/MoonrakerConnection|Moonraker plugin for Cura]]. For other slicers, you'll need to find the appropriate mechanism for uploading to a Klipper/Mainsail/Moonraker ecosystem, if they exist. Otherwise you can upload your gcode by hand in Mailsail.

In your Cura setup, you'll want to set the following for the Print Startup routine:

  start_print BED_TEMP={material_bed_temperature_layer_0} EXTRUDER_TEMP={material_print_temperature_layer_0}
  
This //should// set up an adaptive mesh around your object and set things appropriately.
  
The Print End routine is just:
  
  end_print


To-Do list:
  * (remove the Pi Camera whenever it's convenient...)
  * Pressure Advance configuration
  * Input Shaping/Resonance Compensation
  * Timelapse setup?

{{tag>[digitalfabrication needs_maintenance needs_calibration needs_minor_repair  ]}}