Differences

This shows you the differences between two versions of the page.

--- dust_collection_system [2018/01/12 22:33] – sdh7
+++ dust_collection_system [2018/07/27 15:53] (current) – removed sdh7
@@ Line 1: / Line 1: @@
-=====Dust Collection System=====
-^Name| Dust Collection System|
-^Owner | Makers' Alliance |
-^Location | Shop Zone |
-^Training needed| No|
-^Hackable| Yes|
-^Model| MIXED|
-^Serial| N/A|
-^Arrival Date| 1/9/2018|
-^Working| Yes|
-^Contact| Ian|
-Current Status: Fully Functional
-The core of the system is a Hoover whole-house vacuum system mounted onto a cart. Large-scale dust collection is handled via an ebay-ed cyclone separator and a bucket (to start, we're using a 55 gallon drum, but a 5 gallon bucket is the better long-term solution...)
-For bench-mounted tools, we are implementing dust collection ports. At present, there is a length of 1 1/2" Schedule 40 pipe with a number of Tees, ending in a ball valve (for further expansion.
-Next steps:
-  * Purchase blast gates
-  * Purchase hoses to get from blast gates to tools
-  * Purchase or print adapters from tools to hoses
-Upgrades:
-  * HEPA filter
-  *
-{{tag>[    needs_details]}}